Price is per each speaker

Specifications:

• Design: 2-driver, drivers mounted at 30° relative to mounting surface, 2-way in-ceiling, Ultra-Rigid™ die-cast chassis with GRIP™ mounting bracket
• Price is poer each speaker
• Crossover(s): 3rd-order electro-acoustic at 2.5 kHz
• High-Frequency Driver(s): Dual neodymium magnets, rear damping chamber with ARB™ fins, 25-mm (1 in) P-Be™ pure-beryllium dome, die-cast heatsink, ferro-fluid cooled
• Bass / Midrange Driver(s): Ceramic / ferrite magnets, 38-mm (1-1/2 in) dual-layer voice coil, 210-mm (8 in) Co-PAL™ cone
• Low-Frequency Extension: 37 Hz (DIN)
• Sensitivity - Room/Anechoic: 92 dB / 88 dB
• Frequency Response: On-Axis: ±2 dB from 58 Hz - 45 kHz
• Frequency Response: 30° Off-Axis: ±2 dB from 58 Hz - 17 kHz
• Suitable Amplifier Power Range: 15 - 225 watts
• Maximum Input Power: 140 watts
• Impedance: Compatible with 8 ohms
• Minimum Mounting Depth: 13.9 cm (5-1/2 in)
• Cutout Dimensions Diameter or Height x Width: 27.0 cm (10-5/8 in) (diameter)
• Minimum Internal Volume Required: 20 L (0.71 cu ft)
• External Dimensions: 29.6 cm (11-5/8 in) (diameter)
• Pre-Installation Brackets: PB-10R; retrofit included
• Weight (unpacked): 2.0 kg / 4.4 lb each
• Finishes: White, paintable