|
JVC KS-AR7001 600 Watt Mono Power Amp (ks-ar7001) Features for the JVC KS-AR7001
600 Watts Max. Power
250 Watts RMS Power x 1 at 4 ohms, 400 watts RMS Power x 1 at 2 ohms
Pulse Width Modulated MOSFET Power Supply
Frequency Response (0,-3dB) 20-300Hz
Variable Low Pass Filter 50-300Hz
Subsonic Filter 20-50Hz Variable (-18dB/oct)
Variable Bass Boost (0-18dB @ 45Hz)
Phase Control (0/180?)
Variable Speaker Level Input
Stackable 4-Way Installation
Blue Illumination
Wired Bass Boost Remote Ready
Gold-Plated RCA Input and Output (Pass Through)
Angle Mount Gold-Plated Power and Speaker Terminals
Anti-Pop and Protection Circuit
Top-Mounted Large Rotary Controls
2-Year Warranty
| Continuous Power Output (RMS) at 4 ohms, 20Hz to 300Hz, less than or equal to 1% THD+N (CEA-2006 compliant) |
250W |
| Operation Channel |
1 |
| Maximum Power Output |
600W |
| RMS Power Output |
400W x 1 into 2 ohms, 250W x 1 into 4 ohms |
| Class |
Class-AB |
| MOS-FET Output Stage |
Yes |
| MOS-FET Power Supply |
Yes |
| LPF |
50 - 300Hz, -18dB/oct |
| Subsonic Filter |
20 - 50Hz, -18dB/oct |
| Phase Control (0/180 degree) |
Yes |
| Variable Input RCA Level Control |
0.3 - 6V |
| Variable Speaker Input Control |
1.2 - 12V |
| Variable Bass Boost Control |
45Hz, 0-18dB |
| Gold-Plated RCA Jacks |
Yes (In/Out) |
| Power Supply Block Terminals |
4AWG, Gold |
| Speaker Out Block Terminals |
8AWG, Gold |
| Protection Circuitry (Thermal / Short Circuit / Overload / DC Offset) |
Yes |
| Anti-Pop Circuit |
Yes |
| Control Panel on the Top (Cover) |
Yes |
| LED Illumination |
Yes |
| Frequency Response (+0, -3dB) |
20 - 300dB |
| Signal-to-Noise Ratio (reference: 1W into 4 ohms), CEA-2006 Compliant |
More than 60dBA |
| Load Impedance |
4 ohms |
| Allowance |
1 to 8 ohms |
| Line Input Level/Impedance |
1V/20k ohms (0.3 - 6V allowable) |
| Distortion (at 1kHz) |
Less than 0.1% |
| Dimensions (W x H x D) |
400 x 60 x 288 mm |
JVC KS-AR7001
Gibby's |
