Features:

Description: Evolution™ C5 6.50 in. / 165 mm 2-Way Component System:
6.50 in. / 165 mm Woofers; 0.75 in. / 19 mm Silk Soft Dome Tweeters
Grilles Included

Woofers: Cast Alloy Frame, Patented Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor System, Mineral-Filled Polypropylene Cone, Butyl Rubber Surround, 1-in. / 25 mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll Spider, Ferrite Magnet

Tweeters: 0.75 in. / 19 mm Silk Soft Dome, RSR Variable-Angle Flush-Mount System, Ferrofluid Cooling and Damping, Neodymium Magnet

Crossover Networks: 2-way network with 1st order low-pass and 2nd order high-pass circuit, premium Mylar® capacitors, air-core inductors, 4-position adjustable tweeter output level, 3-position midrange presence control, Polyswitch tweeter protection

• Continuous Power Handling: 75 Watts
• Peak Music Power: 225 Watts
• Rec. Power Range (per channel): 25 - 150 Watts
• System Efficiency: 89.5 dB @ 1W/1m
• System Nominal Impedance: 4 ohms
• System Frequency Response: 48 Hz - 25 KHz (± 3 dB)

WOOFER PHYSICAL SPECIFICATIONS

• Woofer Frame Outer Diameter* (A) 6.52 in. / 165.5 mm
• Woofer Grille Tray Outer Diameter** (B) 6.76 in. / 171.7 mm
• Woofer Magnet Outer Diameter (C) 3.54 in. / 90.0 mm
• Frontal Coaxial Tweeter Protrusion*** (D) N/A
• Woofer Frontal Grille Protrusion**** (E) 0.98 in. / 24.9 mm
• Woofer Mounting Hole Diameter (F) 5.56 in. / 141.2 mm
• Woofer Mounting Depth (G) 2.54 in. / 64.6 mm

*Does not take into account mounting tabs
**Does not take into account logo badge
***Frontal coaxial tweeter protrusion measured from mounting surface
****Frontal grille protrusion measured from mounting surface

Tweeter PHYSICAL SPECIFICATIONS

• Flush Mount Fixture Diameter (A) 1.75 in. / 44.5 mm
• Flush Mount Trim-Ring Diameter (B) N/A Flush Mount Mounting Hole Diameter (C) 1.50 in. / 38.1 mm
• Flush Mount Mounting Depth (D) 0.56 in. / 14.2 mm
• Surface Mount Fixture Diameter (E) N/A
• Surface Mount Protrusion (F) N/A