|
JL Audio 250/1 v2 250 Watt Class D Monoblock Subwoofer Amplifier (250/1v2) The remarkable R.I.P.S. System used in the JL Audio 250/1 ensures consistent power delivery over a wide
range of battery voltages and load impedances.
Add to your cart by clicking the "buy now button" to see the shipping estimate* or call Gibbys today for expert advice and to order by phone toll free 1 877 761 6354. Contact Gibbys Audio Video by email at customerservice@gibbysaudiovideo.com for more information. Safe,secure, insured shipments across Canada. Gibbys Since 1966.
| |
JL Audio 250/1v2 |
| |
|
| Description: |
Class D Monoblock Subwoofer Amplifier |
| Patented Technology: |
High-Damping Class D Circuit with discrete control circuitry (U.S. Patent #6,441,685) |
| Differential-Balanced Input Topology: |
1 pair of inputs |
| On-board Crossover: |
Fully-variable (40-200 Hz), selectable-slope (12 or 24 dB per octave) LP |
| Bass EQ: |
Variable boost up to +15dB |
| Infrasonic Filter: |
Defeatable 24dB / octave at 30 Hz |
| Signal-Sensing Turn-On: |
Permits operation without remote lead |
| Dual mono speaker output connections: |
Accept up to 8 AWG wire |
| +12V and Ground connections: |
Accept up to 4 AWG wire |
| Notes: R.I.P.S. Regulated, Intelligent Power Supply, RealSink- Heat-Management System |
JL Audio 250/1 v2 Class D Monoblock Subwoofer Amplifier Specifications:
| |
JL Audio 250/1v2 |
| Rated Power: |
250 W RMS @ 1.5 ohm-4 ohm (11V-14.5V) |
| THD at Rated Power: |
<0.05% @ 4 ohm |
| S/N Ratio (All Channels): |
>95dB below rated power (A weighted, 20 Hz - 20 kHz noise bandwidth) |
| Frequency Response: |
5 Hz - 250 Hz (+0, -1dB) |
| Damping Factor: |
>500 @ 4 ohm / 50 Hz |
| Input Range: |
Switchable from 200mV-2V RMS to 800mV-8V RMS |
| Dimensions (L x W x H): |
10.25 in. x 9.25 in. x 2.27 in.
260 mm x 235 mm x 58 mm | |
